UPS PMC 40 | 3-phase, output range scalable 10-40 kW

PMC 40 - compact, rack-independent UPS system (up to 40 kW, 3-phase) This uses “double conversion” UPS technology according to the highest classification VFI-SS-111, which provides a constant output irrespective of the incoming voltage, coupled with a high overall operating ratio and minimal space requirements. The PMC 40 may be configured as a redundant system. As a general principle, it is important to ensure adequate climate control of the rack where the PMC 40 is installed. For installation purposes, the rack must have two 482.6 mm (19˝) mounting levels and a minimum depth of 800 mm. Depending on the configuration, mixed population (e.g. with servers) in the same rack is also supported.

The PMC 40 (redundant design) has “safe swap” capabilities. This allows easy, safe module exchange while the system is operational, without having to switch the UPS to bypass mode.

Supply includes
A PMC 40 UPS system is comprised of a basic unit for 482.6 mm (19˝) installation. 1 – 2 UPS modules and, depending on the version, a maximum of two battery packs per UPS module may be integrated into this basic module. The configured complete system comes supplied with basic unit and UPS module(s). The battery packs are supplied separately.


UPS PMC 40 Type 5

  • Thanks to the double conversion technology (VFI-SS-111)the output voltage is independent from the input voltage and frequency
  • Efficient IGBT power transistor technology achieves a high operating ratio of 95% even in part-load operation
  • “Safe swap” compatibility with a redundant design, i.e. the module may be exchanged while operational
  • Every UPS module includes power electronics as well as the control unit including display
  • Installation, commissioning and servicing to be carried out by authorised experts only
Supply includes
  • UPS system in the TS 8 rack
  • Vented front and rear door
  • Fitted with UPS power modules (depending on configuration) and batteries
  • The batteries must only be installed at the point of assembly and are delivered separately
Note
  • Only UPS modules with an identical output may be combined.
  • Technical information/ battery configurations
  • Available on the Internet
  • UPS Rack With Integral Power Modules And Batteries

Related Resources

  • Rittal Extends Power Range for UPS Press Release: Rittal Extends Power Range for UPS
    The PMC line of UPS systems have made Rittal Data Centre a valuable asset to the IT community. With a reputable history in providing the utmost in power management solutions, their new PMC40 and PMC120 products provide extended power range, space saving and increased efficiency. [...]
  • Corporate Rack TS 8 related article Technical Article: Flexible and Scalable 19" Infrastructure Grows with Demand
    An uninterruptible power supply (UPS) is an absolute must for every data centre. If preference is given to scalable and energy-efficient rack-based solutions in the initial planning, then the configuration can later grow at favourable cost as demands increase – the PMC product family from Rittal supplies up to 240 kW per UPS rack... [...]
  • Rittal Extends Power Range for UPS Article: Flexible Security In Data Centres: IT Security Made To Measure
    Even in Australia, power failures are surprisingly frequent. As even minor fluctuations can have serious consequences for sensitive hardware, UPS systems are an essential part of state-of-the-art data centres. UPS systems such PMC 40 or PMC 120 from Rittal, deliver ultimate protection against power failure. [...]
  • Rittal UPS System guarantees uninterruptable power supply systems Article: Flexible Systems for Different Requirements: Shared Solutions for IT and Industry
    The Rittal UPS System guarantees uninterruptable power supply systems. The PMC series from Rittal are designed to work dually in IT and industry. Both the PMC 40 and the PMC 120 models come in depths of 800 and 1,000 mm. They aid in safeguarding industrial controllers and assembly lines controlled by robots. [...]
  • Energy Efficiency by Design Brochure: Energy Efficiency by Design
    Rittal UPS system: Power Modular Concept; Minimal space requirements, simple expansion and maintenance without interrupting operation, and particular energy efficiency – those are the features by which Rittal PMC systems stand out. High efficiency (PMC 40: 22% increase = 30% reduction in heat losses) [...]
  • Choosing The Right UPS For Data Centres Article: Developments In UPS Technology: Choosing The Right UPS For Data Centres
    When choosing a UPS system it's imperative to consider the many different factors involved when determining which one best meets a company's needs. One of the most important things to do is have a risk assessment performed. The UPS PMC 40 has a compact rack-independent UPS system (up to 40 kW, 3-phase)... [...]

Did you know?

Rittal is a world leading single source provider for all IT Infrastructre and Data Centre Solutions.

Contact Us